|
14-inch bunching shear
 Fecon’s
new 14-inch Bunching Shear for skid loaders, small wheel loaders, and
hydraulic excavators weighs 1,450 pounds. Accumulating capacity is 350
square inches; cutting capacity is 14-inch diameter trees. The shear
offers heavy-duty cylinders with large cylinder rods for faster cycle
times.
Click 61 on
ROADFAX card
Barricade system
The F&A-Frame Type I and II Barricade System
from Plastic Safety Systems provides durability and versatility. The
system takes virtually any centerboard including nominal lumber; accepts
Type A and Type C warning lights; has a special handle design that gives
ease of mobility and allows for carrying multiple units; is UV
stabilized and can take worker abuse; and has stacking features that
reduce storage space needs.
Click 70 on
ROADFAX card
Solar-powered portable system
 Hoss
Equipment Company, in partnership with SiteWatch Systems, introduced
a new portable trailer for its advanced technology, solar-powered, “put
it anywhere, watch it anywhere” Wireless Mesh Video over IP Network Site
Management System. The trailer is constructed of heavy-duty rolled
steel, measures approximately 16-feet long by 7-feet wide, and
incorporates a 30-foot crank winch with telescoping mast.
Click 67 on
ROADFAX card
6-inch disk brush chipper
A new line of brush chippers from Rayco
Manufacturing, Inc. includes its 6-inch disk brush chipper. The RC 6D is
ideal for rental applications due to its enhanced safety features and
economical performance. Its overall simplicity leads to reduced
maintenance costs. Strong but lightweight, the chipper is easily towed
behind a pickup truck.
Click 66 on
ROADFAX card
New options for recyclers
 Two
new versions of the model 4700 horizontal recycler are available from
Peterson
Pacific Corp. The new model 4710 is a track-mounted recycler with an
18-inch ground clearance suited for land clearing operations where
mobility is essential. The new model 4750 is powered by three 440-volt
electric motors — twin 300- or 400-horsepower motors power the rotor and
a 100-horsepower motor powers hydraulic functions.
Click 63 on
ROADFAX card
Modular message sign system
The Brick Track modular message sign system from
ADDCO Inc. makes maintenance of overhead dynamic message signs easier,
allowing the maintenance crew to remain in a safe zone on the road side.
The system can be mounted on a variety of new and existing structures
including spans, cantilevers, and roadway bridges. The modularity of the
Brick system allows the configuration of nearly any size sign and can be
used for portable, permanent, and vehicle-mount applications.
Interchangeable components permit simple and easy repairs. The system is
available as full matrix, line matrix, and character matrix.
Click 62 on
ROADFAX card
Reflective panels/vertical message centers
 BriteSide
Reflective Panels and Vertical Message Centers from Lordon Inc. are a
supplement to sign posts. They maximize visual impact to increase
safety, keep traffic moving smoothly, improve emergency response, and
increase driver awareness on the roadways.
The products incorporate reflective sheeting
material adhered to extruded PVC panels and strips. Color and type of
sheeting materials used usually match the sign itself. Panels are
installed in seconds onto signposts.
Click 72 on
ROADFAX card
Aerial work platform
Skyjack’s mid-size rough-terrain aerial work
platforms reach working heights up to 56 feet and capacities up to 1,500
pounds. With gradeability to 30% and immense 64- by 116.5-inch roll-out
platforms expanded, these machines provide extensive jobsite work
support, wherever. Standard features include rear-loading gate, tilt
alarm with drive/lift cut-off, 110-volt GFI protected AC outlet on the
platform, grip lug air-filled tires, lockable cabinets, drivability at
full height on firm level surface, and more.
Click 71 on
ROADFAX card
Asphalt specific plate
 Stone
Construction Equipment’s new SFA3500, one of eight models in the
Silver Fox Forward Plate series, is designed for optimal performance on
asphalt. This model directs 3,500 pounds of eccentric force to the
asphalt for better compaction even with recycled asphalt mixes and is
ideal for asphalt patching and finishing. It features a unique
base-plate geometry, more centrally located eccentrics, and a larger
effective contact surface allowing the plate to float across the asphalt
to provide smooth finishes.
Click 64 on
ROADFAX card
Class 3 mesh vest
The new AW Direct KS-90 class 3 vest is made of
ultra-soft fluorescent lime or orange mesh fabric that keeps you cool
and helps you stand out on both sunny and overcast days. At night, the
high-performance retro-reflective stripes brilliantly return light from
vehicle headlights so drivers notice you. A company name or logo can be
added to the back in bright retro-reflective material.
Click 69 on
ROADFAX card
Paving mat
The Trupave engineered paving mat from
Owens Corning
is a non-woven fiberglass/polyester hybrid mat designed to withstand
today’s higher hot-mix asphalt temperatures. According to the company,
it delays reflective cracking and offers a superior moisture barrier,
extending the life of the pavement and lowering repair and maintenance
costs. In addition, it is fully millable and recyclable, assuring full
use of reclaimed asphalt pavement and eliminating extra costs.
Click 68 on
ROADFAX card
Reprinted from Better Roads Magazine
January 2005 |
